831L Pipe Profiling
Underwater Hardware Specifications
Frequency
2.25 MHz
Transducer
Profiling type, fluid compensated
Transducer Beam Width
1.4° conical
Range Resolution
0.5 mm
Min. Detectable Range
50 mm (~2”)
Max. Operating Depth
1000 m
Max. Cable Length
Standard: 100 m on CAT5e
Cable length may be increased up to ~9000 m using an Ethernet extender. Please enquire for more information.
Interface
Standard: 10 Mbps Ethernet (10 BASE-T) using TCP/IP
Bit rate may vary if an Ethernet extender is in use.
Connector
End mounted, eight conductor, wet mateable (Subconn MCBH8M-AS)
Power Supply
20 – 32 VDC at less than 5 Watts
Dimensions
61 mm (2.4”) diameter x 347mm (13.64”) overall length
Weight in Air
1.2 kg (2.6 lbs)
Weight in Water
0.4 kg (0.8 lb)
Materials
6061-T6 Aluminum & Polyurethane
Finish
Hard Anodize
Software Specifications
PipeSonarL.exe
v1.0.2.8
Windows™ Operating System
Windows™ XP, Vista, 7, 8, 10
Mode
Polar
Range Scales
0.125 m, 0.25 m, 0.50 m, 0.75 m, 1 m, 2 m, 3 m, 4 m, 5 m, 6 m
Train Angles
Continuous rotation, 9° increments
Sector Size
0° – 351°, 9° increments, or Continuous rotation
Step Size
0.9°
Grid Types
Polar and rectangular
File Format
(filename).31L
Recommended Minimum Computer Requirements
2 GHz Pentium 4
256 MB RAM
20 GB Hard Disk
1024 x 768 screen resolution
Ordering Information
1000 m Unit
831L-000-200
IP Address*
Option -020
*Note: Standard IP Address is 192.168.0.5
A different IP Address may be specified upon ordering.