DT101Xi
MULTIBEAM PROFILING SONAR with Optional Internally Integrated Motion Reference Unit & Sound Velocity Sensor
The new DT101Xi Multibeam Profiling Sonar (i.e. Multibeam Echo Sounder) is a single instrument integrating the sonar, motion reference unit (MRU), and sound velocity sensor into one sleek and compact unit. The DT101Xi requires only one cable for operating all three sensors and is a portable solution for any survey. Compatible with the DT100 SIR (Sensor Interface Relay) power supply/timing box, simply connecting a dual antenna GNSS/GPS receiver is all that is required to perform bathymetric surveys.
Underwater Hardware Specifications
Frequency
240 kHz
Swath Width
(nominal beam geometry)
Transmit: 120° x 3°
Receive: 120° x 3°
Effective Beam Widths
Narrow: 0.75°
Medium: 1.5°
Wide: 3°
Number of Beams
Default: 480
Selectable: 240, 120
Range Resolution
Screen: 0.1% of range
Output: 0.01% of range
Range
75 m (246’) water depth
150 m (492’) slant range
Min. Detectable Range
0.5 m (1.6’) below transducer
Motion Reference Unit
Internally mounted OEM version
Pitch and Roll Accuracy: 0.04°
Heave: 5 cm or 5% (whichever is greater)
Sound Velocity Sensor
Internally mounted OEM version of AML Micro•X
1400 m/s to 1600 m/s +/- 0.025 m/s
Max. Operating Depth
(Submersion depth)
300 m (984’)
Contact Imagenex if a greater depth rating is required
Interface to PC
Ethernet (100 Mbps) using TCP/IP
Max. Cable Length
100 m (328’) on CAT5-e, longer cable runs possible with additional hardware
Connector
Underwater wet-mateable 8 conductor
Power Supply (Sonar Head Only)
22 - 50 VDC at less than 10 Watts
Dimensions
306 mm (12.05”) L x 118 mm (4.63”) H x
94 mm (3.68”) W
Weight in Air
4.2 kg (9.5 lbs)
Weight in Water
1.9 kg (4.2 lbs)
Materials
Polyoxymethylene (i.e. Delrin), Titanium, PVC, Titanium connector
Power Supply / Timing Box
DT100 Sensor Interface Relay (DT100 SIR)
2 port Ethernet switch (DT101 PC and Survey PC)
Interfaces to:
DT101
GNSS (GPS)
Gyro / Heading Sensor
100 – 240 VAC or 12 – 36 VDC input range
Dimensions: 394 mm (15.5”) x 314 mm (12.4”) x 92 mm (3.6”)
Max. Ping Rate
20 Hz
Software Specifications
DT101Xi_SIR.exe
Windows™ Operating System
Windows™ XP, Vista, 7, 8, 10
Display Modes
Sector, Linear, Perspective, Profile, Beam Test
Persistence (Trail)
1 – 300 seconds
Range Scales
5 m, 10 m, 20 m, 30 m, 40 m, 50 m, 60 m, 80 m, 100 m, 150 m
Sector Sizes
30°, 60°, 90°, 120°
File Format
Raw Data: (filename).D1R
Profile Point: (filename).D1P
Recommended Minimum Computer Requirements
2 GHz Pentium 4
256 MB RAM
20 GB Hard Disk
1024 x 768 screen resolution
Ordering Information
300 m Unit
838-000-101
Sensor Interface Relay Box (DT100 SIR)
Option
837-000-007
IP Address*
Option -020
*Note: Standard IP Address is 192.168.0.2
A different IP Address may be specified upon ordering.
