DT100

DT100

Underwater Hardware Specifications

Frequency

240 kHz

Swath Width

(nominal beam geometry)
Transmit:  120° x 3°
Receive:  120° x 3°
 

Effective Beam Widths

Narrow:  0.75°
Medium:  1.5°
Wide:  3°

Number of Beams

Default:  480
Selectable:  240, 120
 

Range Resolution

Screen: 0.2% of range
Output: 0.02% of range

Range

60 m (197’) water depth
100 m (328’) slant range

Min. Detectable Range

0.5 m (1.6’) below transducer

Max. Operating Depth

(Submersion depth)
100 m (328’)

Interface to PC

Ethernet (10 base-T) using TCP/IP

Max. Cable Length

100 m (328’) on CAT5-e, longer cable runs possible with additional hardware

Connector

Underwater wet-mateable 8 conductor

Power Supply (Sonar Head Only)

22 – 32 VDC at less than 10 Watts

Dimensions

162 mm (6.38”) L x 117 mm (4.62”) H x 92 mm (3.63”) W

Weight in Air

8 kg (18 lbs) for Stainless Steel or

~2.7 kg (~6 lbs) for Delrin

Materials

316 Stainless Steel, Epoxy, Stainless Steel connector

Also available in Polyoxymethylene (i.e. Delrin) housing

Power Supply / Timing Box

DT100 Sensor Interface Relay (DT100 SIR)

2 port Ethernet switch (DT100 PC and Survey PC)
Interfaces to:

     DT100 (1 or 2 units)  GNSS (GPS)
     Motion Reference Unit
     Gyro / Heading Sensor
     Sound Velocity Sensor

100 – 240 VAC or 12 – 36 VDC input range

Dimensions: 394 mm (15.5”) x 325 mm (12.8”) x 87 mm (3.5”)

Max. Ping Rate

20 Hz

Software Specifications

DT100.exe

or DT100_SIR.exe (for SIR)

Windows™ Operating System

Windows™ XP, Vista, 7, 8, 10

Display Modes

Sector, Linear, Perspective, Profile, Beam Test 

Persistence (Trail)

1 – 300 seconds 

Range Scales

5 m, 10 m, 20 m, 30 m, 40 m, 50 m, 60 m, 80 m, 100 m 

Sector Sizes

30°, 60°, 90°, 120° 

File Format

Raw Data:  (filename).837
Profile Point:  (filename).83P

File Format For SIR

Raw Data:  (filename).D1R
Profile Point:  (filename).D1P

Recommended Minimum Computer Requirements

2 GHz Pentium 4
256 MB RAM
20 GB Hard Disk
1024 x 768 screen resolution 

Ordering Information

100 m Unit

837B-000-440

Sensor Interface Relay Box (DT100 SIR)

Option
837-000-007

IP Address*

Option               -020

*Note:   Standard IP Address is 192.168.0.2
            A different IP Address may be specified upon ordering.

Dual Head Software

Option               -024

DT100

Find a product